Skip to content

Emergency service available 24/7

a home's breaker panel area, with the nearby wall and floor in front of the panel visible.

Home

Water in your breaker panel in Michigan: why is it urgent?

Water and electrical panels are a dangerous mix. In Michigan, keep clear of a wet panel and call a licensed electrician to find the source and check it.

By Rock Electrical ProsNovember 16, 20263 min read

In short

Water in a breaker panel is dangerous. Keep people and pets away, and do not touch the panel or anything near it while water is present. If the panel or the floor in front of it is wet, do not switch breakers. Call a licensed electrician to find the source and check the panel; do not restore power to wet electrical equipment until a qualified electrician has inspected it.

Why water in a breaker panel is urgent

Water can interfere with the components that protect electrical circuits. In molded-case circuit breakers, corrosion, foreign particles, and the loss of lubricants can affect the mechanism. Water exposure can also affect contacts, reduce the insulating ability of internal materials, and impair electronic trip units in some breakers.

Floodwater containing chemicals, sewage, oil, or debris can affect electrical equipment's integrity and performance. Saltwater residue is both corrosive and conductive. Returning power to water-damaged equipment without an evaluation could cause fire, shock, electrocution, or further equipment damage.

What to do when you find water near the panel

Stay clear of the panel and nearby items while water is in or around it, and keep others and pets back. Do not try to operate breakers when the panel or the floor in front of it is wet. Never enter standing water to reach the main power switch; call an electrician to turn it off.

If you see sparks or smoke, or smell burning, leave and call 911. Then call a licensed electrician. If you need electrical help in Michigan, call Rock Electrical Pros to ask about availability.

What an electrician does

A licensed electrician can find the source of the water and check the panel. We advise leaving that assessment to the electrician rather than touching anything near the water.

In one case, a client found a leak in their breaker panel and called us for urgent electrical help. We sent an electrician within three hours of the morning call; the electrician explained the issue and diagnosed it without upselling. We addressed the issue to the client's satisfaction.

Which water-damaged parts need replacement?

Water-damaged molded-case circuit breakers, arc-fault and ground-fault circuit interrupters, fuses, and surge protective devices are listed for replacement. Panelboards, switchboards, motors, and some types of switchgear may be reconditioned.

In many cases, replacement is necessary. After consultation with the manufacturer, some larger equipment may be reconditioned by properly trained personnel. That possibility depends on the equipment's function and age, the degree of flooding, and how long it was exposed. Air drying, rinsing, cleaning, or washing damaged electrical equipment is not a safe way to prepare it for reuse.

Frequently asked questions

Should I flip a breaker if the floor is wet?

No. Never turn power on or off while standing in water. If reaching the main switch means entering standing water, call an electrician to turn it off.

What if I see sparks or smoke, or smell burning near the panel?

Leave and call 911. Then call a licensed electrician.

Sources

Book Online Call Now